PARALLEL PORT:

       CONNECTION TYPE: DB25 (FEMALE)

       PIN     NAME       I/O     DESCRIPTION
       ----------------------------------------------------------------------------
       1       /STROBE    0       STROBE
       2       D0         I/O     DATA BIT 0 (LSB)
       3       D1         I/O     DATA BIT 1
       4       D2         I/O     DATA BIT 2
       5       D3         I/O     DATA BIT 3
       6       D4         I/O     DATA BIT 4
       7       D5         I/O     DATA BIT 5
       8       D6         I/O     DATA BIT 6
       9       D7         I/O     DATA BIT 7 (MSB)
       10      /ACK       I       ACKNOWLEDGE
       11      BUSY       I/O     BUSY
       12      POUT       I/O     PAPER OUT
       13      SEL        I/O     SELECT
       14      +5V PULLUP -       +5 VOLTS DC (10 mA)
       15      N/C        -
       16      /RESET     0       RESET
       17      GND        -       SIGNAL EARTH
       18      GND        -       SIGNAL EARTH
       19      GND        -       SIGNAL EARTH
       20      GND        -       SIGNAL EARTH
       21      GND        -       SIGNAL EARTH
       22      GND        -       SIGNAL EARTH
       23      GND        -       SIGNAL EARTH
       24      GND        -       SIGNAL EARTH
       25      GND        -       SIGNAL EARTH

       PINS 14 ON THE AMIGA PARALLEL PORT SUPPLIES +5 VOLTS OF POWER.

       CONNECT THIS PIN ONLY IF THE POWER FROM IT IS REQUIRED BY THE EXTERNAL
       DEVICE. NEVER CONNECT THIS PIN TO AN OUTPUT OF AN EXTERNAL DEVICE OR
       TO A SIGNAL EARTH.

       PINS 17-25 ARE FOR EARTHING SIGNALS. DO NOT CONNECT THESE PINS DIRECTLY
       TO A SHIELD EARTH.


       COMPILED & WRITTEN BY PAUL ANDREWS JR