CONNECTOR TYPE: amiga internal ide connector

pin 1:  *reset                  pin 21: unused
pin 2:  ground                  pin 22: ground
pin 3:  drive data 7            pin 23: *i/o write
pin 4:  drive data 8            pin 24: ground
pin 5:  drive data 6            pin 25: *i/o read
pin 6:  drive data 9            pin 26: ground
pin 7:  drive data 5            pin 27: i/o channel ready
pin 8:  drive data 10           pin 28: unused
pin 9:  drive data 4            pin 29: unused
pin 10: drive data 11           pin 30: ground
pin 11: drive data 3            pin 31: interrupt equest
pin 12: drive data 12           pin 32: unused
pin 13: drive data 2            pin 33: disk address 1
pin 14: drive data 13           pin 34: unused
pin 15: drive data 1            pin 35: disk address 0
pin 16: drive data 14           pin 36: disk address 2
pin 17: drive data 0            pin 37: *ide_cs1
pin 18: drive data 15           pin 38: *ide_cs2
pin 19: ground                  pin 39: *active (led driver output.)
pin 20: unused                  pin 40: ground

for completeness, the extra four pins used on the mini 44-pin
2.5-inchide connector (as found on the a600 and a1200):

pin 41: +5 volts
pin 42: +5 volts
pin 43: ground
pin 44: unused



COMPILED & WRITTEN BY PAUL ANDREWS JR